Amplifier and Photoreceiver >> Lock-In Amplifiers >> Lock-In Amplifier Modules Series

LOCK-IN AMPLIFIER Single Board SERIES​

Model

LIA-BV-150-L
Single Phase

LIA-BV-150-H
Single Phase

LIA-BVD-150-L
Dual Phase

LIA-BVD-150-H
Dual Phase
Working Frequency 5 Hz - 10 kHz 50 Hz - 120 kHz 5 Hz - 10 kHz 50 Hz - 120 kHz
Time Constants 3 ms - 10 s
6 or 12 dB/oct
 300 µs - 1 s
6 or 12 dB/oct.
 3 ms - 10 s
6 or 12 dB/oct
 300 µs - 1 s
6 or 12 dB/oct.
Adjustable Signal Filter
[6 dB/oct.]
 Highpass 0.2 Hz - 1 kHz
Lowpass 100 Hz - 1 MHz
 Highpass 2 Hz - 10 kHz
Lowpass 100 Hz - 1 MHz
 Highpass 0.2 Hz - 1 kHz
Lowpass 100 Hz - 1 MHz
 Highpass 2 Hz - 10 kHz
Lowpass 100 Hz - 1 MHz
Outputs (BNC) X = in phase,
±10 V full scale, short -circuit protected,
Signal monitor output
 X = in phase,
Y = quadrature,
R = magnitude,
±10 V full scale, short-circuit protected,
Signal monitor output
Case Voltage: 3 µV - 1 V in 1-3-10 steps
Current: 30 pA - 10 µA in 1-3-10 steps
Voltage Input (BNC) Instrumentation amplifier, noise 12 nV/√Hz
Current Input (BNC) Transimpedance amplifier, gain 100 kV/A, noise 0.4 pA/√Hz
Reference Input (BNC) ±100 mV to ±5 V, switchable to TTL
Phase Adjustable 0° - 360°; resolution: 8-bit @ f ≤ 60 kHz, 7-bit @ f > 60 kHz
Temperature drift < 0.01°/K
Max. Dyn. Reserve 80 dB
Digital Control 16 TTL/CMOS inputs: 8-bit phase, 4-bit time constant, 4-bit sensitivity
Power Supply ±15 V, +120 mA / -60 mA
Dimensions 160 x 100 x 20 mm (L x W x H), weight 100 g (0.22 lbs)
The optional Reference Oscillator SOM-1 can be connected by an extension connector inside the module. ​ A mating connector is provided with the device. Optional power supply PS-15 available. For further information please view the datasheet.
​*Pictures shown above are for reference only.  Actual product may differ slightly.  
**Some products may not be available in all countries. Please contact us for further information and clarification.
Not what you are looking for?
​Search Here.​
Alternatively, please contact us for more information.