DC UP TO 200 MHZ VARIABLE GAIN FAST POWER METER
Model |
OE-300-SI-10 |
OE-300-SI-30 |
OE-300-IN-01 |
OE-300-IN-03 |
|---|---|---|---|---|
| Detector Type | Si-PIN | Si-PIN | InGaAs-PIN | InGaAs-PIN |
| Detector Size [mm] | 1.0 x 1.0 | Ø 3.0 | Ø 0.08 | >Ø 0.3 |
| Spectral Range [nm] | 400 - 1000 | 320 - 1000 | 900 - 1700 | 800 - 1700 |
| Input | Free space (fiber adapters available) |
Free space (fiber adapters available) |
FC fiber | Free space |
| NEP (Dependent on Gain Setting) [/√Hz] |
76 fW - 322 pW | 81 fW - 325 pW | 47 fW - 180 pW | 52 fW - 192 pW |
The Following Characteristics Are Valid For All Models:
Performance Range |
Low Noise |
High Speed |
||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Transimpedance [V/A] | 102 | 103 | 104 | 105 | 106 | 107 | 103 | 104 | 105 | 106 | 107 | 108 |
| Bandwidth (−3 dB) [MHz] |
200 (100)1 |
80 (60)1 |
14 | 3.5 | 1.8 | 0.22 | 175 (100)1 |
80 (60)1 |
14 | 3.5 | 1.8 | 0.22 |
| Gain Accuracy | ±1 % (transimpedance) | |||||||||||
| Low Pass Filter | switchable to 1 MHz and 10 MHz | |||||||||||
| Output Performance | ±1 V (@ 50 Ω load), for linear amplification | |||||||||||
| Power Supply | ±15 V, +150 mA/−100 mA typ., ±200 mA recommended | |||||||||||
| Control Interface | 5 opto-isolated digital inputs, TTL/CMOS compatible, analog offset control voltage input | |||||||||||
| Case | 170 x 60 x 45 mm (L x B x H), weight 320 g (0.74 lb.) | |||||||||||